SeaDoo GSI Instrucciones de operaciones Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 105
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
69
MAINTENANCE__________________________________
Lubrication
Use SEA-DOO synthetic grease and
lubricate every 10 hours. Proceed as
follows:
Remove seat to expose engine com-
partment (for the HX/XP Models, open
hood).
On SP Series, remove vent tube sup-
port.
Remove the wing nuts, washers and
pull out PTO flywheel guard.
SP Series/GTS Model
TYPICAL
1. Flywheel guard
2. Wing nuts
GS/GSI/GSX/GTI/GTX Models
1. Flywheel guard
2. Wing nuts
WARNING
Only perform procedures as de-
tailed in this Guide. It is recom-
mended that the assistance of an
authorized dealer be periodically
obtained on other compo-
nents/systems not covered in this
Guide. Unless otherwise speci-
fied, engine must not be running
and the safety lanyard must be
removed for all maintenance pro-
cedures.
WARNING
Always remove safety lanyard
cap from its receptacle to prevent
accidental engine starting before
removing the PTO flywheel
guard.
F01L65Y
2
1
F01I0AY
2
1
smo9701a.bk : smo9701b.fm5 Page 69 Monday, November 3, 1997 9:54 AM
www.SeaDooManuals.net
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 104 105

Comentarios a estos manuales

Sin comentarios