SeaDoo 2007 4-TEC Series Especificaciones descargar pdf (Pagina 67)

smo2007-002-007_c

GTI MODELS

1. Expansion tank

2. Cap

With vehicle on a level surface, liquid

should be between MIN. and MAX.

level marks of coolant reservoir when

engine is cold.

F18E0NY

1. Level between marks when engine is cold

NOTE: The watercraft is level when it

is in water. When on a trailer, raise

trailer tongue and block in this position

when bumper rail is level.

Add coolant/demineralized water to

have the level between marks as re-

quired. Use a funnel to avoid spillage.

Do not overfill.

NOTE: Use a blend of 50% antifreeze

with 50% demineralized water. Pre-

mixed antifreeze/water is available

(P/N 293 600 038) at your authorized

Sea-Doo dealer.

NOTE: Using a blend of 40% an-

tifreeze with 60% demineralized wa-

ter will improve the cooling efficiency

when watercraft is used in particularly

hot weather and/or hot water condi-

tion.

Properly reinstall and tighten filler cap

then reinstall seat extension.

NOTE: A cooling system that fre-

quently requires coolant is the indica-

tion of leaks or engine problems. See

an authorized Sea-Doo dealer.

Coolant Replacement

Refer to MAINTENANCE section.

_____________________

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 147 148

Sin comentarios

SeaDoo 2007 4-TEC Series Especificaciones Pagina 67