SeaDoo GS Instrucciones de operaciones descargar pdf (Pagina 47)

Variable Trim System

(if so equipped)

The variable trim system (VTS) chang-

es the angle of the jet pump nozzle to

provide the operator with a fast, effec-

tive system to compensate for load,

thrust, riding position and water condi-

tions. Correctly adjusted, it can im-

prove handling, reduce porpoising and

position the watercraft at its best

riding angle to attain maximum perfor-

mance.

When first using the watercraft, the

operator should become familiar with

the use of the variable trim system

(VTS) at varying speeds and water con-

ditions. A mid-range trim is generally

used when cruising. Experience alone

will dictate the best trim for the condi-

tions. During the watercraft break-in

period, when lower speeds are recom-

mended, it is an excellent opportunity

to gain familiarity of trim adjustment

and its effects.

When the nozzle is positioned in an up-

ward angle, the water thrust directs the

bow of the watercraft upward. This po-

sition is used to optimize high speed.

TYPICAL

1. Push on arrow pointing upward on VTS

button

2. Bow up

3. Nozzle up

NOTE: VTS position is indicated on a

bar gauge in the information center.

F07L1XY

8°

smo2001-002a.book Page 45 Wednesday, June 7, 2000 3:57 PM

www.SeaDooManuals.net

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 99 100

Sin comentarios

SeaDoo GS Instrucciones de operaciones Pagina 47