SeaDoo GS Instrucciones de operaciones Pagina 73

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 109
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 72
71
TYPICAL
1. Push on arrow pointing upward on VTS
button
2. No interference
3. Nozzle up
Push on arrow pointing downward on
VTS button until VTS stops. The nozzle
must be down and it must not inter-
fere with the venturi.
1. Push on arrow pointing downward on VTS
button
2. No interference
3. Nozzle down
If VTS needs to be readjusted, refer to
an authorized Sea-Doo dealer.
Vacuum Bailer Pick-Ups
They are located each side of the drive
shaft tunnel.
Two pick-ups use a low pressure area
in the jet pump to siphon the water
out of the bilge when the watercraft in
moving forward.
Inspect each pick-up screen for ob-
structions, clean as necessary.
TYPICAL
1. Vacuum bailer pick-ups
Water Tank Trap Drains
GTS Model
Open storage cover and check for
possible obstructions at drain outlets.
1. Outlets
-
CAUTION
Trim ring and/or nozzle must not
interfere at any position.
START
STOP
F01J5CY
1
2
3
START
STOP
F01J5BY
3
2
1
F01L7RY
1
F02L3KY
1
Smo9901b.fm Page 71 Thursday, October 1, 1998 1:42 PM
www.SeaDooManuals.net
Vista de pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 108 109

Comentarios a estos manuales

Sin comentarios