
Storage
WARNING
Because fuel and oil are
flammable, have an authorized
Sea-Doo dealer inspect the fuel
and oil systems integrity as spec-
ified in the periodic inspection
chart.
It is recommended that the watercraft
be serviced by an authorized Sea-Doo
dealer for storage but the following op-
erations can be performed by you with
a minimum of tools.
CAUTION:
Do not run the engine
during the storage period.
Engine Draining
Check engine drain hose (lowest hose
of engine). Make sure there is no sand
or other particles in it and that it is
not obstructed so that water can exit
the engine. Clean hose and fitting as
necessary.
CAUTION:
Water in engine drain
hose should be free to flow out,
otherwise water could be trapped
in engine. Should water freeze in
engine, severe damage will occur.
Check engine drain hose for ob-
structions.
Carburetor-Equipped Models
F07E0MY
1
TYPICAL
1. Engine drain hose
RFI Models
Disconnect the water supply hose
used to cool the magneto. It features
a quick connect fitting. Press both
tabs and pull fitting in order to discon-
nect hose.
This hose is located at the bottom of
the magneto cover beside the engine
support.
F17E0AY
1
TYPICAL
1. Press tabs here and disconnect hose
_____________________
83
Comentarios a estos manuales