SeaDoo GTX 4-TEC Instrucciones de operaciones Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
39
Rear (stern) Eyelet
This eyelet allows a rope with a hook, a
closed end or an open end to be attached.
1. Rear (stern) eyelet
21) Mooring Cleats
These cleats can be temporarily used for
docking, while refueling for example.
1. Mooring cleats
CAUTION: Never use mooring cleats
to pull or lift the watercraft.
22) Footboard
Users feet should rest on the footboard
when riding.
23) Boarding Pads
Provide a cushioned surface for the
knees when boarding from rear of wa-
tercraft.
24) Boarding Platform
Provides a large surface for easier board-
ing from rear of watercraft.
25) Boarding Step
A convenient step to help reboarding
the watercraft.
1. Boarding step
Pull down the step with your hand and
hold until a foot or a knee is put on the
step.
26) Flushing Connector
A convenient connector is provided to
allow easy installation of a garden hose
to flush the exhaust cooling system.
1
F18L0RY
F18L0SY
1
WARNING
When operating the engine while
the watercraft is out of the water,
the heat exchanger in the ride
plate may become very hot. Avoid
any contact with ride plate as
burns may occur.
F18L0IY
1
F18L0JY
smo2004-001a.book Page 39 Monday, March 31, 2003 12:17 PM
www.SeaDooManuals.net
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 103 104

Comentarios a estos manuales

Sin comentarios