SeaDoo RX Instrucciones de operaciones Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
30
19) Seat Latch
Removing the seat allows access to
the engine compartment.
The seat latch is located at the rear end
and underneath the seat.
TYPICAL
1. Seat latch
To remove seat, pull the latch lever up-
ward and hold. Lift and pull the seat
rearward.
NOTE: On the GTX DI models, it is
necessary to remove the seat exten-
sion first and repeat the same proce-
dure to remove the seat.
Engine Compartment
This is where the mechanical, electri-
cal and fuel/oil systems are located.
RX Models
When reinstalling the seat, insert seat
front tab into body hook.
RX MODELS
1. Insert this tab in hook
2. Hook
GTX DI Models
When reinstalling the seat, insert seat
hook into body front tab for each por-
tion of the seat.
1. Insert this tab in hook
2. Hook
Pull latch lever to insert it over the rear
lock pin. Release latch lever then firmly
push on rear of the seat to relatch.
WARNING
Components inside engine com-
partment may be hot. When start-
ing or operating the engine, do not
touch any electrical part. Never
leave any object, rag, tool, etc., in
the engine compartment or in the
bilge.
F01L8XZ
1
WARNING
Periodically verify the seat lock pin
and tighten if needed. Make sure
seat is securely latched.
F01L92Y
12
F06L12Y
1
2
smo2000-003a.book Page 30 Thursday, November 11, 1999 10:44 AM
www.SeaDooManuals.net
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 90 91

Comentarios a estos manuales

Sin comentarios