SeaDoo RX Instrucciones de operaciones Pagina 68

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 91
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 67
66
Antifreeze
Insert a funnel into hose and pour an-
tifreeze mix in engine until the colored
solution appears at cooling system
bleed outlet (LH side of hull).
At this point, remove the hose pincher
at tuned pipe bleed hose. If necessary,
continue to pour antifreeze mix until
the colored solution appears at the
other cooling system bleed outlet
(stern eyelet).
Remove the remaining hose pinchers
in this order to allow proper flow of an-
tifreeze.
1. Engine cylinder drain hose.
2. Water outlet hose.
Pour approximately 200 mL (7 oz) of
antifreeze in the water regulator valve
supply hose to allow antifreeze flow-
ing through the valve and into muffler
to protect it.
Reconnect hose to T-fitting.
DI Models
Install hose pinchers at the following
location:
1. Air compressor water outlet hose
2. Water supply hose (largest hose)
1. Engine cylinder drain hose
1. Disconnect this hose here
F07E0LY
F07E0QY
1 2
F07E0JY
1
F07E0RY
1
smo2000-003B.fm Page 66 Wednesday, November 17, 1999 8:18 AM
www.SeaDooManuals.net
Vista de pagina 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 90 91

Comentarios a estos manuales

Sin comentarios